Cuberevo - Ipbox 900 - 910 Images > Enigma 2

[mikine56]

AAF WM 2010 Image IP Box

Changes the Spirit of Spring Image:
GIT rev1057
+ fix freesat EPG
+ Streamproxy verbessert
+ Kernel Fix STM22
+ Basiert jetzt zu 95% aus dem Git
+ Szap Kernel
+ Git Player2
+ Enigma2 06/2010
+ nur Tuner , FrontPanel and CI Treiber aus Tideglo 0.96
- Optimierung ist noch im Beta Stadium

AAF M3465
+ szap (TV Bild schon während des Bootvorgangs in unter 30 Sekunden möglich)
+ szaplong für nahezu nahtlosen Übergang in E2
+ Fortschrittsanzeige während des Bootvorgangs (optional)
+ Text Taste im MC fixed
+ FullHD Icon in der Infobar bei 1080i Sendern HD Ready bei 720p

-> Menü -> AAF Panel -> Einstellungen -> Szap Config
- szap - Ja [/quote]
aktivieren

szaplong:
ist eine Zusatzfunktion die den in szap gewählten Kanal mit dem E2 Kanal synchronisiert so das ein nahezu nahtloser Übergang möglich ist.

szap_frontend:
0 benutze Tuner1
1 benutze Tuner2

[Only Registered Users Can See LinksClick Here To Register] 9000 HD Flash
[Only Registered Users Can See LinksClick Here To Register] 9000 HD Full USB
[Only Registered Users Can See LinksClick Here To Register] 9000 HD USB

[Only Registered Users Can See LinksClick Here To Register] 910 HD Flash
[Only Registered Users Can See LinksClick Here To Register] 910 HD Full USB
[Only Registered Users Can See LinksClick Here To Register] 910 HD USB

[Only Registered Users Can See LinksClick Here To Register] 900 HD Flash
[Only Registered Users Can See LinksClick Here To Register] 900 HD Full USB
[Only Registered Users Can See LinksClick Here To Register] 900 HD USB

[Only Registered Users Can See LinksClick Here To Register] 91 HD Flash
[Only Registered Users Can See LinksClick Here To Register] 91 HD Full USB
[Only Registered Users Can See LinksClick Here To Register] 91 HD USB

[mikine56]

PKT mod 9.7 Tideglo rev 0.9.7 for Ipbox 900/910/91HD USB

14.07.2010

release 0.9.7
*********************
- enabled the possibility to use "openvpn --auth-user-pass FILE" command
- update openvpn to last stable release (it should solve problems on connection timeout)
- fixed the bug on recordings playback
- fixed RGB green color on Scart
- fixed AutoSwitch on Scart (so you can set if enable it or not in the enigma2 menu, this is not true
if the receiver is in standby mode: this means you will have always the signal trhought TV scart if something connected to the VCR Scart)
- fixed widesignal over the Scart connector
- fixed Scart's signals on cuberevo-250hd
- some other fixes on Scart to send the good signal to let other devices know that a signal is present
- fixed a bug on tuxtxt
- fixed the bug: channel name on front display when standby mode active in some casual cases
- fixed the bug: channel name on front display when standby mode active after that mediaplayer is used
- added fw_env.config in /etc/ directory, on flash you can edit it in the /var/etc/ directory (usefull for ippe's multibood editor plugin)
- fixed osd screenshot on webif
- /mnt/ directory is now writeable in flash version
- /media/ directory is now writeable in flash version
- little fixes for screen resolution mode changing
- fixed the reading for front panel display settings
- fixed the reading for time settings (let me know if you will find other bugs on getting correctly the time)
- fixed webremote on webinterface
- updated timezone list, more option available now same as the standard (if you find any kind of problem just report it)
- on flash version: now CleanupWizard should not ask you all the time to free the space left
- added possibility to update Date/Time automatically using the CuberevoVFD plugin (usefull for first enigma2 start: just press the yellow button
on the plugin screen and when you will exit from the plugin, the channel tuned will get updates for current date/time)
- fixed many e2 pathes to prevent from unwanted crashes
- optimized a bit the free space (now enigma2 should take less space than previous versions)
- Unicable should be better usable now
- added TuxboxPlugins plugin (wich should run old tuxbox *.so plugins: default directory where to place plugins is "/usr/lib/tuxbox/plugins/")
- first try fix for zd1211b and added also zd1211 wireless driver (insmod the zd1211.ko or zd1211b.ko module if you need to use it)
- first try fix for rt2870/rt3070 wireless driver (insmod the rt3070sta.ko module if you need to use it)
- update Enigma2 CVS to 03/07/2010

About wireless drivers: please report if they are working or not (i can't test them directly)

Enjoy it! Tideglo

POINT Changes for 9.6.1:

- A lot of cosmetic changes to improve stability and speed

Greetings to Polish Team Kathi

[Only Registered Users Can See LinksClick Here To Register]
[Only Registered Users Can See LinksClick Here To Register]
[Only Registered Users Can See LinksClick Here To Register]

[mikine56]

Enigma 2 Nightly Build: 0.9.8 version

release 0.9.8
*********************
- fixed Scart/NTSC, HDMI/480i60, HDMI/480p60 resolutions (let me know if they are working ok or not,
here i can't test perfectly NTSC standard, but seems working good)
- fixed grey screen of death
- fixed some compatibility of HDMI video output
- fixed the switching between certain 1080p modes unreliable
- fixed YCbCr to full range RGB conversion
- sometimes happened that screen can get hidden when switching between modes that do not change the resolution
- some rescale improvements
- fixed some downscale bugs
- fixed some artifacts cases when stopping playback (need to test more about it)
- first try for audio clock initial setup for HDMI compatibility (people who are using Samsung's TVs and
have had problems with audio throught HDMI should let me know if there are improvements)
- fixed the bug where non-linear video zoom fail all over on (now it works good let me know how do you feel it)
- fixed a wmv bug
- fixed an alignment problem on DVD-player
- updated cross epg changes (now you should be able to use latest cross-epg version)
- minor bug fixes

USB and Flash versions here: [Only Registered Users Can See LinksClick Here To Register]

Enjoy it! Tideglo

[mikine56]

Enigma 2 Nightly Build: 1.0.0 version

release 1.0.0
*********************
- enabled movie-list menu also on 100hd, 200hd, 250hd (press PLAY button instead of FILE on other receivers)
- fixed some playback bugs
- updated crossepg patches (compatible with last crossepg version)
- fixed some CI-CAM compatibility
- first try to fix TimeZone bug (time should be always ok now, standby and running mode)
- unicable is now more customizable (check enigma2 configuration)
- synced enigma2 with 29/10/2010 cvs

Flash and USB version here:
[Only Registered Users Can See LinksClick Here To Register]

[MIDO2010]

SifTeam-0.5.0-r13554 for Ipbox 900/910 HD (based on DGS r13554)

Quote:
This README is for CubeRevo HD model series.
This document was approved on 24/December/2010 by the Cuberevo-Digital.

Cuberevo-digital release r13554: (24/December/2010)
--------------------------------------------------------------
1. Update tpinfos of EUTELSAT W3A(7.0E), ARABSAT 2B(30.5E), TURKSAT 1C, 2A(42.0E)
2. Fix youtube doesn't work.
3. Fix N-Radio doesn't work.


Caution
1. Back up your data of HDD except the version of r12947 software in your box
At first, you have to back up recorded file or photo, mp3 data from STB
before downloading this image if you need. This image is supported to something
different file format or data format compare with previous software image.
2. Format HDD except the version of r12947 software in your box
You should be format HDD after downloading completed this new image,
otherwise, it will be possible to malfunction about PVR, timeshift, mp3,photo album and so on

Note.
1. Prohibited to recording, and PIP function in Server box when Multiroom Service or Streaming Player is running.
and The boxes should have same FTP user ID/Password with server box and client box when you use Multiroom service function

2. ext3 file system is slower than ext2 normally.
If you will record two HD channels with ext3 at the same time, it may fail in record.

we have checked the speed as below
ext2 speed : approximately 7MB/s
ext3 speed : approximately 3MB/s
900-usb_update.tar.gz
[Only Registered Users Can See LinksClick Here To Register]
910-usb_update.tar.gz
[Only Registered Users Can See LinksClick Here To Register]

[mikine56]

Enigma 2 Nightly Build: 1.0.3 version

Originariamente inviata da ReadMe
release 1.0.3
*********************
- fixed starting of the network
- fixed 1080i freezing (back to old driver)

Download here:[Only Registered Users Can See LinksClick Here To Register]

[mikine56]

PKT mod 1.0.3.312 Tideglo rev 1.0.3 91/900/910/9000HD

- fixed "tvguide" plugin, it is running again
- fixed Subtitles during live TV
- fixed some bugs during playback
- fixed Network setup crash
- fixed ffw and rev buttons on Mediaplayer
- fixed IP getting through DHCP
- fixed a bug on getting properly the DNS
- applied run level boot system (so now we will have a better unix like system)
- fixed 100hd RCU keymap
- Fixed GS when Teletext is invoked an no tuner is configured
- Certain video buffer strides cause video pipeline underflows
- CVBS Chroma voltage levels are too low
- some mkv compatibility fixes (MP2 audio, AAC and some other audio/sync compatibility)
- some subtitles (ass, srt) compatibility fixes
- fixed a bug during decoding on 720p channels
- fixed some bugs during decoding on 1080i channels
- fixed wss over scart for 4:3 and 16:9 channels
- fixed some HDMI and scart compatibilities with signals on some TVs
- fixed: if teletext crashes then you can quit with EXIT button (no more teletxt or power/standby button are used,
only exit button works to prevent from unwanted exits)
- fixed teletext output when division on screen is choosen
- fixed timeshift (now should work better)
- fixed button abc (1 and 2 key button on remote controller) when "all channels" selection box is running
- fixed DVDplayer crash when started with HD skins (it still crashes with HD skins on exit, i still don't know why )

- a user reported this bug: "please check the DVB-C tuner driver. There is a small bug.
I'am not the only one with this problem and its not an Signal Problem. Sometimes after switchin the cahnnel there comes the Message Tuning failed but after 5-15 Seconds the picture come.
I know there are not many people how use Dvb-C but in Germany are many peoble have this problem. It seams that the cpu is overload when i switch one some transponders."
Please test and report if it's ok or not (i can't test dvb-c). Thanks.

[Only Registered Users Can See LinksClick Here To Register]

[gregorii]

Enigma2 Nightly Bulid 1.1.1 Version
Cuberevo mini - Ipbox 900 - 910 Images

release 1.1.1
*********************
- fixed the bug that causes crashing on enigma2 during pixellation/freeze (call it as you like)
- fixed network setup crashes with standard skin
- fixed green button-aspect ration function
- updated to 02/01/2011 enigma2 cvs
- fixed no audio on channel switch on few cases (i can't fully test this, so report if it happens again)
- fixed audio crop on some televisions (when you hear crop-crop-crop on channel switching)
- added support for AVS file codec
- many other fixes for better code and stability and to prevent crashes

I made a full reset of the buglist (because of the new structure), so start thinking like the needs to report also old bugs if you find them again!!!!!!


_http://enigma2.sifteam.eu/index.php?dir=Enigma2%20NightlyBuild/Enigma2%20NightlyBuild%201.1.1/

flash and usb by tideglo

[mikine56]

SifTeam Enigma2 Extreme Edition v.1.3_1.1.1
Moved to Tideglo 1.1.1
Fixed Green button
Added lcn scanner
Minor bug fixed
Plugin: InstallaE2
Livescore
Bootplus
Tgcube
CrossEpg


For E2 cuberevo thanks to:

Ipbox2008 (coder)
Skaman (coder)
Biondo79 (betatester)
Morpheus883 (Settings Creator & Betatester)
Theseven007 (Betatester)
Katapip (Betatester)
Tideglo (Enigma2 Cuberevo Driver Boss)
Killer bestia (web master and manteiner)
Margy82(Skinner)
Nikolasi (Skinner)
Genge (Betaster)

[Only Registered Users Can See LinksClick Here To Register]

[osmanliimperator]

Enigma2 OpenSource SH4 Duckbox Project GIT-3129 PKT SVN-1321 HAARP v3b Image

Image is designed for installation on SATA/USB devices
Support receiver: IPBOX 9000/910/900/91HD
Kernel stm24-207

Added by sh4 Duckbox Team:

- [libeplayer3] update to ffmpeg 0.8.6
- [eplayer3] playback aac-he streams with aac-lc
- fix timing problem in filepush
- [Player2 179/191] possible fix for chopped DTS sound on some files
- [e2 nightly-0]introduce 3D Mode for OSD ( paint OSD twice in Side by Side or Top and Bottom )
- [libeplayer3] support for OSD 3D modes for subtitles
- [libeplayer2, libeplayer3] Close directory file handles after looking for subtitle files
- new BusyBox 1.19.2 (stable) config and patches
- extend streamproxy to support linuxdvbapi5
- [player2_191/player2_179]resturucture dts fix. The fix now only applys to DTS streams and the playback time is only corrected on time differences up to 50ms this MAY fix some issues with async sound
- [player191] adoptions from p179; bugfix for 710x receiver (HD channel problems)
- [player2_191] fsynth bugfix
- use utf8 as python default
- adapt wrong page_offset and improve mem

Added by PKT:

- new function "live ecm" in infobar
- show Channel Number on Front Pannel + ON/OFF switch in setup menu
- upgrade CrossEPG svn 268
- fix qwerty VirtualKeyboard (UK layout)
- fix Backup/Autorestore function | LABEL=RECOVERY required
- fix channel number showing on VFD if long channel name
- set home directory to /root
- EPG description on channel list -> ON
- change reading of ecm.info
- new converters and skins modifications
- fix dimmer action when channel switch
- fix parsing PROV, CAID, PID
- moving EPG support to KeyMapper
- ReferencePKT optimization
- set PKT-GoldHD skin as default
- fix CIFS mount if passwd is empty
- MPlayer fix GS of EOF
- upgrade formating device in Install Manager
- update API of MyTube based on last CVS source
- update EmuManager v1.0.6: add sh4Cam support & gbox fix
- font FIX moved to Skin setup
- removed unused files
- BP menu settings modification
- fix showing processes
- res_emu in standby add in BP->Settings
- tune and fix sys_info
- add showing /Loaded modules/ in BP ->Menu ->System
- update WIFI scripts:
* add detecting of supported USB WLAN adapters
* user is informed about unsupported device
* optimize selecting WLAN driver
* optimize starting WLAN driver
- fix show event-progress in channel selection
- fix crossEPG
- PKT InstallManager 1.2.2
- PKT KeyMapper 1.5
- update Permanent Clock
- fix EMUManager russian translate
- add green button support in Media Player
- fix streamproxy after reboot
- add support for fake cccam

+ change only in HAARP V3b version
- picons update
- added BPanel activation in MoviePlayer ( key blue )
- added compatibility to standard non PKTeams skins
- fix dot on VFD if channel number is not available
- fix for radio mode wallpaper
- fix showing picons on channels list, when are located in /hdd/picon folder
- add /media/usb/picon to picons search folders
- 2nd generation of speed up channels zap
- add standby smooth extingushing TV
- channel list update 20-11-11
- display quality improvement
- new BluePanel 2D v3.1.21 with graphic interface:
-- added function to check update is needed
-- added color & numeric keys actions support to immidiate plugin/function/menu activation
-- 1st row - keys: 1, 2, 3, 4
-- 2nd row - keys: 5, 6, 7, 8
-- 3rd row - keys: red, green, yellow, blue
-- add menu key action support
-- add changelog information menu
-- add synchronization of local time and date from NTP server
-- add On/Off the smooth extinguish TV while switching to standby mode
- fix missing reference.dat
- fix international fonts switch in Skin Setup
- screenshot OSD fix
- fix GS on GlassHD skin
- upgrade e2 to 2011-09-13-experimental
- add % loaded e2 process on VFD
- fix exception on hddtemp running on box with non-sata port
- [IP9K] standby clock fix
- [IP9K] VFD Icons fix
- [IP9K] add partitions automount to /media folder
- [IP9K] fix sound drops
- fix GS in TimeShift path Menu
- sata HDD sleep in standby fix
- add new Webinterface v1.6.8
- add WebMedia 4.0
- add new Multimedia items in BP
- fix firmware update checking
- some fixes for cardreader driver
- add VFD Record Icon blinking

Regards
Polish Koders Team

IP-Box 900

_http://www.2shared.com/file/XhUKopsZ/PKT_IP900_E2_HAARP_v3b_Image.html

IP-Box 910

_http://www.2shared.com/file/OUyB45_D/PKT_IP910_E2_HAARP_v3b_Image.html

[paradiselost]

Opencuberevo mod ACT v1.0 91HD usb.tar
_http://www.datafilehost.com/download-0efe2ec1.html

Opencuberevo mod ACT v1.0 9000HD usb.tar
_http://www.datafilehost.com/download-ce186b3f.html

[Gaio]

link removed

[erglava]

Q8 link is down